All Forums
 Hardware
 General Hardware, ADSmartIO, Digital I/O and A/Ds
 Using the SA-1100 for clocked communications		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

KnowledgeBase

296 Posts
Posted - 26 Feb 2002 :  15:56:20  Show Profile  Email Poster
Q: I want to use the Graphics Client SA-1100 I/O ports for clocked data communications. How fast can I expect the data to be transmitted?

The data rate for transmission depends significantly on your application and if other processes are running while you are transmitting. As a reference, a simple CE VC++ application running on a 220MHz Graphics Client using LQ64D343 configuration 700110-4137B can toggle a single SA-1100 bit about every 6 or 7 microseconds using the CE WriteFile() function. This best-case scenario results in a clock rate of about 75kHz. For high-speed communications, Ethernet, serial, PCMCIA and USB are the best options.

------------------
ADS Knowledge Base

opsens_claude_belleville

34 Posts
Posted - 15 Mar 2006 :  17:15:59  Show Profile
How can I use this port on GCX ?

I want to clocked the data communication but DIO and GPIO are too slow

Thanks
Go to Top of Page

akidder

1519 Posts
Posted - 15 Mar 2006 :  19:05:59  Show Profile  Email Poster
Thanks for your note. Please email us with details about your project requirements. We'll be glad to work with you on a solution.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000