Hello,
First, I have developed on the ARM GM board without problems using C# in the MS IDE and ActiveSync. In fact, I have a working system sitting right next to my AGX on my workbench. I have followed the directions in the C# users guide.
I have followed the instructions in 110010-10071-3_CE_Developers_Guide.pdf, etc. I have a working ActiveSync connection.
I have 2 issues:
1) I keep having to run the device authorization to get the connection started. Further, there have been several occasions when it just would not work until I gave up and went away. I can't afford to keep setting up this connection time and time again every day.
2) Although I can (sometimes) connect to the device from the IDE and download an image, debugging does not work. It does some downloading, says launching application and then says 'Ready'. And drops back into design mode. I can run the downloaded image on the device, but I need to be able to debug. I have checked my memory configuration and it is the same as on my Sharp GM board.
thanks,
Tom Dorgan. |
All Forums
Microsoft Windows CE
IDE Connection/Debugging
Forum Locked
Send Topic to a Friend
Printer Friendly
Posted - 25 Mar 2004 : 15:50:37
