| Author |
Topic |
|
|
dorgant
46 Posts |
 Posted - 01 Apr 2004 : 23:16:11
|
I can connect to the device. It's not easy but it can and must be done painstakingly every time the machine is rebooted.
However, the IDE will not debug an application. I created a Hello *** app with just one button whose text displays the number of times it has been pressed. I can deploy and run this application on the device.
However, debugging using the IDE acts like it is going to work, says Launching Application and then Ready. That is, it just stops.
I need to be able to debug to port my application from the GM to the AGX.
I am using:
Microsoft Visual C# .NET 69586-335-0000007-18090
|
|
|
dorgant
46 Posts |
Posted - 03 Apr 2004 : 10:28:13
|
Hmmm, I'm wondering if my questions are so basic that nobody will bother to answer them or if nobody is answering any (I don't see a lot of activity in the forums) or if, perhaps, I should be asking Microsoft (LOL, there). I guess I will try the WinCE newsgroups. Or, maybe, we just aren't purchasing enough hardware? I'm not involved with that end of it.
Oh, well, whatever.... I miss actually doing coding on the GraphicsMaster instead of spending my time fiddling with connections.
Tom. |
 |
|
|
dorgant
46 Posts |
|
|
jbaik
22 Posts |
Posted - 05 Apr 2004 : 08:12:06
|
We'll get you new image soon.
Tanks for your information.
|
|
|
|
akidder
1519 Posts |
Posted - 20 May 2004 : 14:34:32
|
| Hi Tom. Sorry I didn't remember to post earlier about this, but as of AGX build 4.20.06, the CE image includes toolhelp.dll. Thanks for the heads up and suggestion about this! |
|
|
| |
Topic |
|
|
|
All Forums
Microsoft Windows CE
Wince AGX C# Debugging (toolhelp.dll)
Forum Locked
Send Topic to a Friend
Printer Friendly