All Forums
 AGX/Linux demo lower left touchscreen dead
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  


1 Posts

Posted - 20 Aug 2004 :  11:47:35  Show Profile  Email Poster
Right out of the box, approximately one square inch of lower left corner of touchscreen won't respond to touch. That includes the crosshair used for calibration. I can only proceed by touching an area outside of this square inch, so naturally the calibration ends up too far off to be useful. Help! I haven't changed any factory settings. This is our first Applied Data touchscreen, so this is probably another dumb newbie question :-)


1519 Posts

Posted - 11 Oct 2004 :  11:12:34  Show Profile  Email Poster
Issue Resolution:

This issue was resolved with an update to the touch panel drivers. We had changed the filtering on the AGX touch panel inputs without updating the driver. The change is in release 2.4.27_vrs1_pxa1_adsx1.
Go to Top of Page
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000