All Forums
 General Hardware, ADSmartIO, Digital I/O and A/Ds
 BitsyX, BitsyXb ADSmartIO Firmware
 Forum Locked  Topic Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  


1519 Posts

Posted - 08 Nov 2004 :  12:40:43  Show Profile  Email Poster
ADSmartIO Firmware: BitsyX and BitsyXb

The following are releases of the ADSmartIO firmware for the BitsyX. Release dates are approximate. Details about ADSmartIO usage are posted at topic 306.

If reprogramming new boards with CE builds older than 4.20.10, see topic 1360 for the updated programming app.
Firmware 0010

Rev 6 (Dec-2006)
- Eliminates rev 3 change so backlight stays on when RqOnOff press is trapped by application

Rev 5
- Not released

Rev 4 (7-May-2004)
- Corrects battery charger functionality (removes 2.5 Hz toggle/heartbeat on PB0/Charge pin)

Rev 3 (4-Dec-2003)
- Backlight initialized as off (AVR PD7=0)at ATMega power-up (including system wakeup)
Contact us if you need Rev 3.

Rev 2 (2-May-2003)
- I2C driver communicates with real-time clock (RTC)
- Panel_enable signal supports passive panels

Edited by ljoy 22-Oct-07: Older software available upon request


47 Posts

Posted - 10 Jul 2007 :  17:33:15  Show Profile
We've added a link to AVR Rev 6.
Go to Top of Page
 Forum Locked  Topic Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000