Eurotech Support Forums - Startup CE 4.1

All Forums

Microsoft Windows CE

General CE

Startup CE 4.1

Forum Locked

Send Topic to a Friend

Printer Friendly

Author

Topic

wabtec4

59 Posts

Posted - 06 Jan 2005 : 23:50:07

I put my program in \FlashFX Disk\Startup directory, but it does not run automatically!

What's wrong? How to fix this?

Platform: CE 4.1 on ADS Bitsyboard.

akidder

1519 Posts

Posted - 07 Jan 2005 : 10:16:04

Here are a few steps to take to troubleshoot this issue:

Confirm the App Runs Normally
To make sure there's nothing wrong with the application or installation, perform a cold boot of your system (reset or power-cycle the board), then confirm that the application will launch from "\FlashFX Disk\Startup\" when you double-tap it.

Confirm that EXE Launching is Enabled
If it appears that your application is launching correctly when you double-tap it in the startup folder, next make sure that your system enables launching of EXEs at startup. The standard system registry sets the LaunchEXE registry key to "1", but there's a chance it's disabled in your adsload.reg. See topic 227 for details.

If you still can't get your app to launch at startup, let us know which build of CE you are using. The only 4.10 build we have posted for the Bitsy is 4.10.12 (listed as 4.12 in the build selector), but I want to make sure.

Let us know what you find.

p.s. I've moved your post from the "CE Downloads and Documents" forum to the "General CE" forum.

Topic

Forum Locked

Send Topic to a Friend

Printer Friendly

Jump To:

Eurotech Support Forums

This page was generated in 0.02 seconds.

Snitz Forums 2000