All Forums
 LCD Panel Power NOT controlled by JP3 on VGX
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  


6 Posts

Posted - 11 Jan 2005 :  16:52:55  Show Profile  Email Poster
VGX User's manual Section 3.4.9 LCD Display 2mm Connector indicates the voltage level to power the LCD panel on pins 29, 30 can be controlled by setting JP3 appropriately.

It does not work.

JP3 does effect the data and clock levels (either 3.3V or 5V) but not the overall power to the display (always stuck at 5V).

How do I get power to the LCD to be 3.3V?


1519 Posts

Posted - 11 Jan 2005 :  18:03:25  Show Profile  Email Poster
There is a typo in section 3.4.9 of the VGX manual. It should read "JP1".

Set the panel power with JP1 (per sections 3.3.1, 4.8.3 and 6.2.4).
Go to Top of Page
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000