All Forums
 Microsoft Windows CE
 eVB Application Development
 Error: 'Platform Manager could not connect...'		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

ctacke

877 Posts
Posted - 28 Feb 2002 :  14:30:17  Show Profile  Email Poster
When trying to connect to my Development System from the eVB IDE I get an error that says
'The Platform Manager could not connect to the device. This happens if the project type does not match the connected device, or if a required file in Windows CE Services, or the Platform SDK is missing or corrupt. (Error Code 0xLX).'
What does this mean and how do I get past it?

This error occurs if you selected the wrong Project Type when you started your eVB project. The New Project dialog will list a project for each SDK you have installed plus a "Windows CE Formless" project.

If you are using an ADS development system with CE 3.0 on it, you must use the "Windows CE HPC 2000 Project" template (installed with the HPC 2000 SDK).

If you are using a development system with CE 2.11 or 2.12, you must use the "Windows CE HPC Pro Project" template (installed with the HPC Pro SDK).

For more key values see Topic 792
-----------------
Chris Tacke, eMVP
Applied Data Support

Edited by - ctacke on 02/28/2002 14:56:43
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000