Eurotech Support Forums - I2C Bus Failures when running I2CTest.cpp

All Forums

Hardware

Ethernet, IR, Serial, CAN and high speed data

I2C Bus Failures when running I2CTest.cpp

Forum Locked

Send Topic to a Friend

Printer Friendly

Author

Topic

dolson

0 Posts

Posted - 10 Mar 2006 : 15:33:16

Help,

I am receiving the following errors when running the ADS I2CTest code:

+I2C::I2C(0xd0)
I2C_Open
I2C_Reset
I2C_SetStop
I2C_IOControl code = 1769536
-I2C::I2C
+DS1307::ReadRTC
+I2C::Write
I2C_Write 2 bytes
I2C_WriteByte (0x01)
ICR(0) = 0x000000ec
ISR(0) = 0x0
ICR(1) = 0x000000ec
ISR(1) = 0x0
Timeout in I2C_WriteByte
ICR = 0xec
ISR = 0x0
-I2C::Write
+I2C::Write
I2C_Write 1 bytes
I2C_WriteByte (0x01)
ICR(0) = 0x000000ec
ISR(0) = 0x0
ICR(1) = 0x000000ec
ISR(1) = 0x0
Timeout in I2C_WriteByte
ICR = 0xec
ISR = 0x0
-I2C::Write

and so on.

I am also receiving the following error on initialization:

Initializing I2C driver v 1.0...Bus Timeout = 65536 msI2C_Reset
I2C_SetStop
ok

This is being run on a BitsyX under:

WinCE .Net
BSP build 4.20.24

Thanks,

Edited by - dolson on 23 Mar 2006 13:15:03

Topic

Forum Locked

Send Topic to a Friend

Printer Friendly

Jump To:

Eurotech Support Forums

This page was generated in 0.02 seconds.

Snitz Forums 2000