All Forums
 Microsoft Windows CE
 CE Sample Applications and Utilities
 ADS sphere downloading new image
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

Nytric

0 Posts

Posted - 21 Aug 2006 :  15:40:14  Show Profile
have ADS sphere. I am trying to find out how to load a fresh CE image. Here are my problems:



USB won’t work when I try to boot with DIP switch as debug. Here is the output when booted with debug switch:


Flash Type ............. 0x1

Data Bytes Per Sector .. 0x200

Sectors Per Block ...... 0x200



Boot option: 2, 2, 9000



-----------------------------

Sphere Boot Loader Debug Menu

-----------------------------

(A) Read memory

(B) Write memory

(C) Display CPLD info

(E) Erase FLASH block

(M) Get MAC address

(N) Set MAC address

(R) Get RTC info

(S) Set RTC info

(T) Toggle boot menu time-out

(1) Load NK.BIN from CF card

(2) Load NK.BIN over Ethernet

(3) Load NK.BIN from hard drive

(0) Quit

---------

>





I tried to find some info on keypad where can I connect keyboard. I found one document no: 610110-40142
../developers/documents/610110-40142_Keypad_with_serial_ports_1-2_DB9M.pdf

3. The issue: there are A to T letters( for menu selection ) and I can only connect 0-9 and A-D. What am I suppose to do? Am I doing something wrong? Where can I find suitable keypad? Am I going in right direction ?


Now, the big issue is how to provide input.USB keyboards don't work. PS2 connector is supplying power. Where can I connect the keyboard ?




bsamuels

53 Posts

Posted - 28 Aug 2006 :  15:58:31  Show Profile  Email Poster
Options from the bootloader menu are selected using the PC keyboard via a terminal program. e.g. HyperTerminal
Go to Top of Page

Nytric

0 Posts

Posted - 29 Aug 2006 :  09:41:58  Show Profile
Thanks.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000