Eurotech Support Forums - BitsyXb connections

All Forums

Documentation

BitsyXb connections

Forum Locked

Send Topic to a Friend

Printer Friendly

Author

Topic

figued

0 Posts

Posted - 28 Aug 2006 : 17:07:27

In trying to identify the connectors I need to purchase to use the BitsyXb with the Bitsy Personality board with Ethernet capability, I find much disparity in the documentation. for example: The mechanical drawing 630111-8000 shows a J44 on Page 2 of 3. The schematic 640111-800A does not have a J44.
Is there documentation available with consistent nomenclature for the connectors and part numbers for the correct mates?
One needed item is a "dongle" to interface the MMC to a SD memory device. The help would be appreciated.
Thanks,

Dave

akidder

1519 Posts

Posted - 29 Aug 2006 : 09:28:41

Hi Dave. Thanks for checking in. J44 and J45 are headphone output and microphone input, respectively. You should be able to spot them in the top center of the personality board schematic (640111-8000A-4 at topic 408).

We've got an SD/MMC dongle that we've used with the BitsyX. I'm not sure if the BitsyXb has the drivers for it, but I can check. Drop us a line with the OS you're using and your contact details, and we can have our sales group get the dongle into your order.

Topic

Forum Locked

Send Topic to a Friend

Printer Friendly

Jump To:

Eurotech Support Forums

This page was generated in 0.03 seconds.

Snitz Forums 2000