All Forums
 Microsoft Windows CE
 CE Drivers
 Cannot Load Device Driver Dll on BitsyXB
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

bbynum

0 Posts

Posted - 26 Jan 2007 :  16:06:14  Show Profile
Hi,

We have a PCMCIA multifunction card (two channels of comm and one channel video) that we are trying to deploy to the BitsyXB platform.

I have been able to use ADSCopy to get the Dll to the \Windows directory at start, but how to get the dll loaded by device manager is a problem.

I have tried placing the dll into FlashFX Disk\System diectory, followed the Swedish Keyboard example, and tried adsdriverlaunch to no avail.

The registry settings are:
[HKEY_LOCAL_MACHINE\Drivers\PCMCIA\PHOTOTELESIS-TacM-61AB]
"Prefix"="TCM"
"Index"=dword:1
"Dll"="Tacm.dll"
If I delete this registry entry I get the Unidentified PCCard Adapter dialog. So that can only leave the dll not being loaded by device manager. I have instrumented the dll with writes to a file on the flash disk from the DllMain, and DllMain is never called.

This applies when the card is inserted before OR after boot/restart.

Any suggestions would be greatly appreciated.

Thanks,

Bill

Any help would be appreciated

Edited by - bbynum on 01 Feb 2007 14:39:18
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000