All Forums
 Embedded Linux
 Linux Downloads and Documents
 Debian Installer 2008-01-23 (Etch)
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

jhess

135 Posts

Posted - 24 Jan 2008 :  14:03:02  Show Profile  Email Poster

Debian Installer 2008-01-23 (Etch)

Debian Ramdisk 2008-01-23 is a version of the Debian installer that can be used to install pure Debian or Debian with ADS modifications onto ADS boards. This installer can be used if you would like to install a newer version of Debian stable than ADS has released, or if you want to fully customise your Debian installation.

We do not recommend that most users use this method to install Debian, since it is quicker and less failure prone to use our prepackaged Debian root filesystem. See this forum post for details.

Debian will be installed to a USB hard drive connected to the board, and all contents of the USB drive will be erased by the install.

The following files are included in this release:
ramdisk.gz - installer image
install_config.txt - u-boot bootloader configuration file for installer
root_config.txt - u-boot bootloader file to start the installer
cmdline.txt - used to boot on systems not using the u-boot bootloader
cmdline_bitsyx.txt - used to boot the BitsyX
MD5SUMS - checksums of files in this release


Usage
To use it, download the ramdisk.gz image from the link above and copy it to an ATA flash card. Also copy onto the card, the kernel zImage file for the kernel you want to use. This README.txt file provides more information on using the installer.

On the BitsyX, use this cmdline.txt.

On AGX, GCX and VGX, use this cmdline.txt.

To install Debian without ADS additions, in a fully interactive mode, edit the cmdline.txt file and remove everything from "preseed/url" on to the end of the line.

Boot the system from compact flash and proceed with the first stage of installation. If you are installing Debian with ADS additions, this installation process should be completely noninteractive. If you are not you will need to answer the normal questions related to a Debian installation.

After installation is complete, remove the compact flash and replace the cmdline.txt file with the cmdline.txt files needed to boot Debian from a hard drive. The files can be downloaded from the Full Debian Distribution 2006-01-27 release. Consult the README.txt from that release for details and additional information about using Debian on ADS boards.


Verification
MD5SUMS provides MD5 checksums for all files in this release.


History
This release is based on the stable Debian 4.0r2 release. It supercedes the previous 2007-05-07 version.

  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000