All Forums
 Hardware
 Cables and Connectors
 HW-PC4 and GCX		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

jjmackay

24 Posts
Posted - 15 Aug 2008 :  15:22:12  Show Profile  Email Poster
I just got the Parallel IV(DLC7/HW-PC4) to reprogram the boot loader of GCX board as indicated by http://support.eurotech-inc.com/forums/topic.asp?topic_id=653.

Now, what cable can I use to interface to the GCX? The HW-PC4 comes with a 2x7 pins ribbon connector that have 2 females terminator. The J9 interface on the GCX is a 2x8 female connector.

grenierm

133 Posts
Posted - 15 Aug 2008 :  17:12:05  Show Profile  Email Poster
Hi, thanks for your question.

We will send you a cable drawing and parts list so you can generate a cable to interface between the Parallel IV and the GCX.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000