Eurotech Support Forums - TightVNC Connection to Device

All Forums

Microsoft Windows CE

CE Downloads and Documents

TightVNC Connection to Device

Forum Locked

Topic Locked

Send Topic to a Friend

Printer Friendly

Author

Topic

grenierm

133 Posts

Posted - 18 Feb 2010 : 16:19:09

Remote Desktop Connection between a Development PC and a Eurotech device running Windows CE can be done using the TightVNC application.

A typical setup should look like:

Eurotech Device-side:
- Record the IP address of the device
- Run vncsrve.exe, available for download here
- You might consider launching on automatically on startup, although not required.

Development PC-side:
- Use the TightVNC-client, available for download here
- Launch the client version and enter the IP address of the Eurtoech device

At this time you should see a window appear on your Development PC which will give you control of the Eurotech device.

Note: This process was tested on an ARM platform.

Edited by mgrenier 2-Mar-2010: Add comment about ARM platform testing

Topic

Forum Locked

Topic Locked

Send Topic to a Friend

Printer Friendly

Jump To:

Eurotech Support Forums

This page was generated in 0.02 seconds.

Snitz Forums 2000