Eurotech Support Forums - Active Sync Connection problem on BitsyXB

All Forums

Microsoft Windows CE

CE Downloads and Documents

Active Sync Connection problem on BitsyXB

Forum Locked

Send Topic to a Friend

Printer Friendly

Author

Topic

adal01

11 Posts

Posted - 23 Apr 2010 : 16:33:35

I'm using the BitsyXB board running windows CE 5.0. With a personality board that has USB, COM1,COM2 and COM3.

I'm trying connect to the Bitsy board from my XP computer using Microsoft Active Sync version 4.5 with Visual Studio 2005 Development environment.

This is the process that I use.

1) Restart the Bitsy Board.
2) Start Active Sync from the PC to make a connection to the Bitsy board.
3) Run the program Repllog.exe in Windows CE on the Bitsy board.
4) I always get a DEVICE NOT READY error.

I always get a device not ready error message from Active Sync when I try to connect.

I am able to see system start up information from the Com3 port via Hyper terminal and everything looks good. In other words, there are no debug error messages when the system starts up.

I have also tried to connect to the Bitsy board with Active Sync via COM1,COM2,and COM3.

Any help on this issue would be great.

Thank in advance
Allen

twhite

133 Posts

Posted - 26 Apr 2010 : 09:35:47

adal01, we are investigating your issue. We will let you know of our answer ASAP. Thank you for your patience.

adal01

11 Posts

Posted - 26 Apr 2010 : 11:57:48

Hi twhite,

I just wanted to let you konw my problem has been solved. It was an active sync version problem. Once I tried to connect with active sync 3.7 instead of 4.5 it started working.

Thanks for all your help

twhite

133 Posts

Posted - 26 Apr 2010 : 12:42:38

Glad to hear you're OK now. Thanks for the reply.

Topic

Forum Locked

Send Topic to a Friend

Printer Friendly

Jump To:

Eurotech Support Forums

This page was generated in 0.02 seconds.

Snitz Forums 2000