All Forums
 General Hardware, ADSmartIO, Digital I/O and A/Ds
 High vibration: Mounting circuit boards
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  


1519 Posts

Posted - 24 Jun 2015 :  11:16:28  Show Profile  Email Poster
Per IPC-A-610, secure the PWBs to standoffs using a flat washer against the board with a split washer on top between the flat washer and the screw head or nut.

Do not use toothed star washers, as they cut into the plating and laminations of the board over time and will not produce an attachment that will withstand vibration and thermal cycling.
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000