All Forums
 Hardware
 Ethernet, IR, Serial, CAN and high speed data
 Bitsy Doesn't Boot		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

landryd

13 Posts
Posted - 11 Jun 2002 :  10:41:48  Show Profile  Email Poster
Display comes up with garbage and I get nothing off the debug port. I've changed the OS several times to test different versions and displays. Debug port was working and is connected properly.

akidder

1519 Posts
Posted - 11 Jun 2002 :  11:01:08  Show Profile  Email Poster
Hi Dan. It sounds like you're pretty familiar with the Bitsy and how to update the system files. Did it stop working after you updated a file or did something else precipitate the change?

Some things I would look at:
- Is power on the board good? You can test the various voltages esily at J19 of the personality board.
- Is there a chance a DIP switch is set incorrectly?

It's also possible that the boot code got erased during a failed update. In that case, you'll have to send it back to the factory to get reflashed.

Please let us know what you find.

-----------------------
Drew Kidder
ADS Technology Transfer
Go to Top of Page

landryd

13 Posts
Posted - 11 Jun 2002 :  12:25:39  Show Profile  Email Poster
I'm thinking it's the BootCode, I had issues changing to a different display and had to update the system as well, I may have disconnected the power during a transfer. Power is fine and so are the dip switch settings.
What is required to reflash the Bootcode, is it possible for me to do it.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000