All Forums
 Microsoft Windows CE
 CE Downloads and Documents
 Bitsy Windows CE Boot Code
 Forum Locked
 Printer Friendly
Author Topic  

KnowledgeBase

296 Posts

Posted - 05 Aug 2002 :  17:16:15  Show Profile
Bitsy Windows CE Boot Code

Boot code for the Bitsy is stored in onboard flash and can be updated in the field. You may need to do this to support performance improvements or newer features of Windows CE builds.

Select the boot code for your system based on the amount of DRAM installed. "No CF" builds of the boot code ignore the Bitsy compact flash port during boot; use these builds if you have a peripheral that uses the Bitsy CF as an expansion bus.

Instructions are included in each ZIP file for how to update the boot code.

32MB DRAM
  • Standard: 1.76-32M

  • No CF: 1.75-32M-noCF


  • 64MB DRAM
  • Standard: 1.76-64M (needed for CE builds dated July 2002 and later)



  • Return to Bitsy CE files page

    Edited by akidder 18-Aug-2002: Add link back to CE files page
      Topic  
     Forum Locked
     Printer Friendly
    Jump To:
    Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
    This page was generated in 0.02 seconds. Snitz Forums 2000