Rev C BitsyX
Boots Rev 1 through Rev C BitsyX CE systems

1.21 (June-2007)
- Support for J3D flash parts
- Support for FAT32

1.14 (19-Apr-2005)
- Supports full suppression of debug output
- Provides warnings if user attempts to use a FAT32 card for file updates

1.13 (26-Jan-2005)
- Support 32 and 64 MB on board flash.

1.12 (16-Dec-2004)
- Better suppression of debug output during boot
  0xA1E30044 0x0000000 ; debug port(1-3); 0=disabled

1.10 (20-Dec-2003)
- Updates boot code before other files
- Adds option to suppress most of debug output during boot
  0xA1E30044 0x0000000 ; debug port(1-3); 0=disabled
Known Issue: Does not support programming Ethernet MAC address

1.09 (4-Dec-2003)
- Adds option to display ADSLOAD.BMP for boot splash screen
- Supports BitsyX rev C power management

---

Older boot code (below) is not compatible with BitsyX Rev B or later. Older boot code does not know about changes made to PCMCIA power control signals in more recent boards.

---

Rev A BitsyX
Boots Rev 1, 2 and A BitsyX CE systems.

1.08
- Supports KITL (200 MHz release 700115-01040 required for debugging)

1.07 (24-July-2003)
- Sets CPU Run mode at boot to 400 MHz

---

Rev 2 BitsyX

1.06 (16-July-2003)
- Corrects potential problem in which system will fail to boot if HWT file is invalid

1.05
- Supports FAT16/FAT12 ATA cards
- Loader erases Persistent Registry when a new CE image is loaded into flash

1.04
- Supports changing GPIO direction to improve sleep mode power consumption

1.03
- Supports booting CE directly from ATA card
- HWT values start at base address 0xA1E30000 instead of 0x81E30000 to eliminate cache issues.

---

Rev 1 BitsyX

1.02 (24-January-2003)

---

Edited by akidder 16-Jul-2003: Update boot code to 1.06.
Edited by akidder 7-Aug-2003: Add v 1.02 for rev 1 BitsyX
Edited by ctacke 16-Sep-2003: Update boot code to 1.07.
Edited by akidder 22-Dec-2003: Add revision history
Edited by akidder 8-Jun-2004: Add v 1.09 per topic 1510
Edited by akidder 16-Dec-2004: Add v 1.12
Edited by akidder 25-Jan-2005: Add note not to use older boot code with rev B or later.
Edited by ctacke 19-Apr-2005: Add v 1.14
Edited by akidder 24-Jul-07: Add note about MAC address for version 1.10 based on Dec-2004 notes. Other versions probably don't support it either, but I haven't checked.