All Forums
 Hardware
 Cables and Connectors
 Display Cables for the Sharp LQ64D343		  Forum Locked  Topic Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

akidder

1519 Posts
Posted - 14 Oct 2003 :  12:32:05  Show Profile  Email Poster
Display Cables for the Sharp LQ64D343

The following are cable drawings to connect the 34-pin IDC headers of many ADS products to the Sharp LQ64D343, LQ10D368 and compatible TFT, VGA displays.

Products like the BitsyX and AGX use 2mm headers for the LCD display signals, but otherwise use the same 34-pin pinout as described in these documents.

These cables use the same pinout as the 610110-3008A (12 bpp) and 610110-3007A (16 bpp) cables still shipped with some development systems, but the 3074 and 3075 cables use a smaller Quadrangle adapter board that plugs into a wider range of displays.

Select the cable based on the product and display resolution you are using (the XScale simplifies cable design; see topic 990 for details):
XScale, 16 or 12 bpp: 610110-3075A

StrongARM, 16bpp: 610110-3075A

StrongARM, 12 bpp: 610110-3074A

See Topic 1279 for other cables used on standard develoment systems.

Edited by akidder 13-Jul-2004: Add link to topic 1279 for cable drawings.
  Topic  
 Forum Locked  Topic Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000