| Author |
Topic |
|
|
KnowledgeBase
296 Posts |
 Posted - 26 Feb 2002 : 15:15:19
|
Q: How can I use CAN bus on ADS Windows CE products?
ADS has a library of functions that support CAN bus communications. If you need CAN in your Windows CE application, you may request the drivers from ADS by sending mail to ADS. Make sure to include how you plan to use the drivers in your application. For Linux drivers, consult this topic.
For further information, please see the CAN topic index.
Edited by akidder 3-June-2002: Add links to CAN topic and Linux drivers. |
|
|
akidder
1519 Posts |
Posted - 21 Nov 2002 : 12:17:48
|
The current Windows CE CAN drivers for ADS products are as follows:
Philips SJA1000The ADS driver for the SJA1000 currently supports 11-bit and 29-bit identifiers in "PeliCAN" mode. See included readme files for details about how to select the mode.
ADS Products: AGC, AGX, VGX, GCX (drivers included in WinCE builds)
Chip datasheet: PDF (250kB)
Driver specification: Topic 1740
Intel 82C257This CAN controller is used primarily ADS's SA-1100 and SA-1110 lines of products.
ADS Products: Graphics Client Plus, Graphics Master, Thin Client
Chip datasheet: PDF (640 kB)
Driver and sample app: 700110-8120C (C++)
Contact us if you wish to use one or more of these applications.
Edited by akidder 21-Nov-2003: Add information about SJA1000 CAN sample. Move topic to CE Drivers forum from "Ethernet, IR, Serial and high speed data" forum.
Edited by akidder 5-Dec-2003: Add SJA1000 note about support for 11-bit message identifiers
Edited by akidder 1-Mar-2004: Update version of SJA1000 app to rev 3
Edited by akidder 5-Mar-2004: Indicate that CAN drivers now support 29-bit identifiers
Edited by akidder 15-Mar-2004: Release 720020-11625 selects 11- or 29-bit CAN mode by reading registry
Edited by akidder 25-May-2004: Update to -8120C. Reformat post. Change topic title from "How can I use CAN bus on ADS CE products?"
Edited by akidder 24-Nov-2004: Change "Sample Applications: 720020-11625 (C++), 720020-1409 (C#)" to driver specification link. Remove "supports 11-bit identifiers in SJA-1000 BasicCAN mode or"; new spec runs SJA1000T in PeliCAN mode. |
 |
|
|
akidder
1519 Posts |
Posted - 25 May 2004 : 16:26:54
|
Intel 82C527 update (April 2004)
Revision C of the 82C527 driver fully reinitializes the driver after wakeup. |
|
|
| |
Topic |
|
|
|
All Forums
Microsoft Windows CE
Windows CE CAN drivers and sample applications
Forum Locked
Topic Locked
Send Topic to a Friend
Printer Friendly