All Forums
 Microsoft Windows CE
 CE Drivers
 Initiating Touch Panel Calibration with a Keyboard		  Forum Locked  Topic Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

akidder

1519 Posts
Posted - 17 Dec 2003 :  10:09:01  Show Profile  Email Poster
Q. Help! My touch panel is out of calibration and I can't navigate to the Stylus applet. What's the quickest way to recalibrate my touch panel?

The quickest way to recalibrate your touch panel is to use a keyboard. Most ADS systems now include a USB function port, and all systems include support for a PS/2 keyboard.

Connect the keyboard to your device (resetting if it's a PS/2 keyboard), then follow these steps:
  1. Open Control Panel (either Start Menu [Windows key] -> Settings -> Control Panel or My Computer -> Control Panel)

  2. Select and open Stylus applet (cursors, then Enter)

  3. Move to the Calibration tab (Ctrl-Tab)

  4. Press the Calibrate button (Enter)

For further reading about touch panels on ADS products, see the touch panel topic index.
  Topic  
 Forum Locked  Topic Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000