Eurotech Support Forums - AGC CE Boot Code

All Forums

Microsoft Windows CE

CE Downloads and Documents

AGC CE Boot Code

Forum Locked

Topic Locked

Send Topic to a Friend

Printer Friendly

Author

Topic

akidder

1519 Posts

Posted - 08 Sep 2004 : 10:48:20

AGC Windows CE Boot Code

Boot code for the AGC is stored in onboard flash and can be updated in the field. You may need to do this to support performance improvements or newer features of Windows CE builds.

Select the boot code for your system based on the amount of DRAM installed and the version of the board you are using.

Instructions for updating the boot code are found in the Developer's Getting Started Guide.

Click here to request a CE build for the AGC.

Related topics: AGC User Manual

64 MiB DRAM

Rev 2 AGC

1.81 (10-Sep-2003)
- Removes unneeded debug messages

1.80 (13-Feb-2003)
- Adds ability to program MAC address from boot code (must reboot to display new MAC address)

Edited 9-June-2008 by ljoy: Changed obsolete link for CE builds to an email request.

Topic

Forum Locked

Topic Locked

Send Topic to a Friend

Printer Friendly

Jump To:

Eurotech Support Forums

This page was generated in 0.02 seconds.

Snitz Forums 2000