All Forums
 Microsoft Windows CE
 CE Downloads and Documents
 Video ClientX CE Builds		  Forum Locked  Topic Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

akidder

1519 Posts
Posted - 05 May 2006 :  14:59:23  Show Profile  Email Poster
CE Build Revision History: Video ClientX (VCX)

Legal Notice
These Windows CE images are intended to update Video ClientX product for which a Windows CE license has already been purchased. You must purchase a new license for every unit that is updated to a new version of Windows CE (e.g. 5 to 6) or updated to a different license model (e.g. Core to Pro).

By downloading any Windows CE image from this site, you agree to the following Microsoft statement:
"This software is subject to the terms and conditions of the end user license terms. This software is provided only for use with, and for licensed end users of, the Eurotech Video ClientX. Any other use of this software is strictly prohibited and may subject you to legal action."


The following summarizes the changes made between CE builds for the VCX. Release dates are approximate.

Related topics: Video ClientX User Manual

CE.NET 4.2

4.20.18 (14-September-2007)
- Updates to unique ID
: 64 MiB DRAM : Pro RAM 19MiB

4.20.16 (20-July-2007)
- Corrects problem where audio is very low after first wakeup
: 64 MiB DRAM : Pro RAM 19MiB

4.20.15 (28-June-2007)
- Adds CompactFramework 2.0
- Removes mouse cursor
: 64 MiB DRAM : Pro RAM 19MiB

4.20.12 (14-Apr-2006)
- Adds kernel ioctl to control PWMs
: 64 MiB DRAM : Pro RAM 18MiB

4.20.11 (17-Feb-2006)
- Serial driver: Improve operation with OpenNetCF serial drivers.
: 64 MiB DRAM : Pro RAM 18MiB

4.20.10 (07-Dec-2005)
- Add I2C and audio driver
: 64 MiB DRAM : Pro RAM 18MiB

Important: Builds 4.20.10 and later require that an AC97 codec be connected to the board for the system to boot.


4.20.09 (24-Aug-2005)
- Serial drivers: Default baud rate on all ports is 38400 baud to support debug on COM1 after wakeup
: 64 MiB DRAM : Pro RAM 18MiB


Updated 19-Sep-2007 by ljoy Added 4.20.18
  Topic  
 Forum Locked  Topic Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000