All Forums
 Hardware
 General Hardware, ADSmartIO, Digital I/O and A/Ds
 LCCRx registers		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

3935

16 Posts
Posted - 06 Mar 2002 :  07:39:52  Show Profile  Email Poster
Where can we find information concerning the LCCRx registers specified in the *.hwt file (and probably used by the display driver)?

akidder

1519 Posts
Posted - 06 Mar 2002 :  13:49:44  Show Profile  Email Poster
Information about the LCCR panel timing registers can be found in the StrongARM manual. When looking at those registers and creating panel timings, be aware that workable timings for panels can vary considerably from the specifications listed by the manufacturer.

Because configuring operating systems to work with specific panels is complex, ADS doesn't explicitly support its customers to make the conversion. However, we have created configurations for many displays already. Please contact our Sales group if you want to use a particular panel with your ADS product. We may already have a solution for you.

-----------------------
Drew Kidder
ADS Technology Transfer
Go to Top of Page

akidder

1519 Posts
Posted - 08 May 2002 :  09:37:51  Show Profile  Email Poster
Take a look at the list of supported displays to see if we've creating timings for the panel you're interested in.
Go to Top of Page
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000