All Forums
 Microsoft Windows CE
 CE Downloads and Documents
 GCX boot code		  Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

cbadr

154 Posts
Posted - 26 Jun 2007 :  16:36:05  Show Profile  Email Poster
GCX Windows CE Boot Code

Boot code for the GCX is stored in onboard flash and can be updated in the field. You may need to do this to support performance improvements or newer features of Windows CE builds.

Select the boot code for your system based on the amount of DRAM installed.

Instructions for updating the boot code are found in the Developer's Getting Started Guide.

Related topics: GCX CE files page, GCXUser Manual

64 MiB DRAM

1.03 (11-Apr-2006)
- Setting default debug port to 0 in the hardware table suppresses all debug output
- Debug port defaults to COM3 if the hardware table contains no entry for the debug port



Created by cbadr 26-Jun-2007
  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000