All Forums
 TurboXb Development System--Schematics
 Forum Locked  Topic Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  


1519 Posts

Posted - 21 Sep 2007 :  14:33:48  Show Profile  Email Poster
TurboXb Development System Solution Board

The TurboXb Development System Solution Board brings the processor's signals out to headers for use in our standard development systems. It also adds an audio codec, amplifiers, a touch panel controller, real-time clock and a number of power supplies to the core functionality of the TurboXb processor module.

The schematic for the TurboXb Development System is supplied to illustrate how a system might be designed. Contact us if you are interested in creating your own TurboXb design.

Solution Board Rev A
Schematics (.PDF, 216kB)

- LCD, backlight and touch panel connectors
- USB Host and Function ports
- Three EIA-232 ports
- CompactFlash and SD/MMC sockets
- 10/100BT Ethernet
- Stereo speaker and headphone outputs
- Microphone input
- 5V input power


154 Posts

Posted - 03 Nov 2009 :  11:54:34  Show Profile  Email Poster
Change notice:

Eurotech made changes to Rev B TurboXb modules' reset circuit, which require removing C135 from the solution board for the system to power up.

This modification is not needed if you're using Rev A TurboXb modules since they have a different reset circuit.

If you need more information, contact our Support team.
Go to Top of Page
 Forum Locked  Topic Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.02 seconds. Snitz Forums 2000