| Author |
Topic |
|
|
Russ-Eurotech
273 Posts |
|
|
twhite
133 Posts |
 Posted - 12 Nov 2010 : 15:55:17
|
Manual Errata: Page 66, J1 COM connections:
Pins 18 and 19 should be shown as Not Connected (NC) instead of GND'd.
Sorry for the error. |
 |
|
|
Russ-Eurotech
273 Posts |
Posted - 12 Apr 2011 : 10:16:13
|
Change to Right-Angle USB Header
Please note the following change to the TITAN board USB connector:
PCN10006 Titan USB pin header changed to right angle on standard builds.
To summarize,
PCN10006 states that the USB header on the board has been modified
from a vertical angle header to a right angle header.
Customers who wish to keep the original TITAN design
with the vertical angle connector should contact Eurotech. |
|
|
|
Russ-Eurotech
273 Posts |
Posted - 19 May 2011 : 15:24:09
|
Titan Flash Change Notice
This note is provided to highlight a change to the on-board NOR flash used on the TITAN board.
The key difference is that the P flash requires slightly slower chip select timings.
On Linux based TITAN systems,
RedBoot needs to be updated to v1i5 to support the newer device.
Linux images created for the TITAN can be used on P flash based boards
by applying the latest Redboot version.
On Windows CE based units,
no change is required because the flash timings setup by eBOOT already meet the P flash requirements.
Boards ordered without an operating system are always supplied with Redboot v1i5
so would not be affected unless a user downgraded the RedBoot version
by loading an older 32MB Linux flash image that contained pre-v1i5 RedBoot.
A copy of the PCN is available here:
 PN103-TITAN_PF32_FLASH_CHANGE - 17 KB
Linux image including Redboot v1i5: TITAN v4i3c Linux image w/ RB v1i5 - 12.4 MB
Redboot v1i5 files: TITAN Redboot v1i5 files - 237 KB
Please contact Eurotech Support with any questions: support.us@eurotech.com |
|
|
|
Russ-Eurotech
273 Posts |
Posted - 08 Aug 2012 : 11:31:00
|
TITAN V1I1 to V2I1 design change notification
Issue Date: 27th July 2012
Summary
This product notice is to highlight the functional differences between the TITAN V1I1 and V2I1.
A copy of the Product Notice is available here:
Product Notice 106 (Rev2) ~71 KB
Please contact Eurotech Support with any questions: support.us@eurotech.com |
|
|
|
Russ-Eurotech
273 Posts |
Posted - 08 Aug 2012 : 11:48:49
|
TITAN V1I1 END OF LIFE NOTIFICATION
Issue Date: 27th July 2012
Summary
This Product Notice serves as notification of the planned End-of-Life (EOL) of the Version 1 TITAN board.
Reason for EOL
Several components used on the TITAN V1I1 board have been discontinued by their respective manufacturers with no alternative offering that meets the existing component form, fit or function.
Important Dates
Last order date – 31st August 2012
Last shipment date – 14th December 2012
These dates are provided in order to allow time to plan any migration effort needed to move to the new TITAN V2I1.
A copy of the Product Notice is available here:
Product Notice 124 (~75 kB)
Please contact Eurotech Support with any questions: support.us@eurotech.com |
|
|
|
Russ-Eurotech
273 Posts |
Posted - 17 May 2013 : 16:56:06
|
TITAN Toolchain fix for AEL v4i5
Issue Date: 08 MAY 2013
Summary
This product notice highlights the following issue with the TITAN V2I1 Linux Development Kit release:
AEL v4i5 supplied for use with the TITAN V2 fails to build C & C++ applications due to a setup issue following install of the supplied AEL tools.
The Product Notice also gives the resolution for the issue.
A copy of the Product Notice is available here:
Product Notice 139 Rev 1 (~74 kB)
Please contact Eurotech Support with any questions: support.us@eurotech.com |
|
|
| |
Topic |
|
All Forums
Documentation
TITAN board Technical Information
Forum Locked
Topic Locked
Send Topic to a Friend
Printer Friendly