All Forums
 Microsoft Windows CE
 The Basics (CE)
 GC Plus: Evaluation system components
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

KnowledgeBase

296 Posts

Posted - 27 Mar 2002 :  13:21:25  Show Profile  Email Poster
Graphics Client Plus Evaluation System

The following are the components of the standard WinCE Graphics Client Plus evaluation system (configuration #900110-8000Ax). The configuration revision of your system is listed on the underside of your GC Plus board.

For the latest engineering releases of these files, see the GC Plus CE files in this forum.

Hardware
  • GC Plus single-board computer, 32MB SDRAM, 32MB flash

  • Sharp LQ64D343 VGA TFT 5V color flat-panel display

  • 3M Dynapro DMF95459 analog-resistive touch panel

  • Artesyn SCL25-7618 5/12V power supply


  • Cables
  • LQ64D343 12-bit display cable, 610110-3008A (PDF)

  • Touch panel cable, 610110-4161A (PDF)

  • Backlight cable, 610110-4013A (PDF)

  • Power adapter, 610110-4009A (PDF)

  • DB9 F/F null modem cable, Cables to Go #03040, Jameco #181403

  • 9-pin ribbon cable for serial port 3 on J10, 610110-4004A (PDF)

  • 40-pin, 2mm ribbon cable for J7 terminated with two DB9 connectors, serial ports 1 and 2, 610110-4007A (PDF)


  • Software
  • Windows CE 3.0, ADS 10MB build 3.xx, 700110

  • REG and HWT configuration for LQ64D343 display, 32MB RAM, 32MB flash
  • 700110-87xxx (ZIP)
  • ADSLOAD.EXE (dummy/filler app) 700110-8124A (ZIP)

  • ADSLOAD.BMP ADS logo for desktop: 700110-8901A(CE 3.0, ZIP) or 700110-8900A(CE.NET, ZIP).


  • ------------------
    ADS Knowledge Base
      Topic  
     Forum Locked
     Send Topic to a Friend
     Printer Friendly
    Jump To:
    Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
    This page was generated in 0.02 seconds. Snitz Forums 2000