All Forums
 Bitsy Personality Board--Mechanicals
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  


296 Posts

Posted - 30 Apr 2002 :  11:50:39  Show Profile  Email Poster
Bitsy Personality Board--Mechanicals

These mechanical drawings show the dimensions and layout of the Bitsy Personality Board, a reference design for use with the Bitsy and Bitsy Plus. All dimensions are shown in inches. This board is sometimes referred to as the Bitsy Connector Board. We use 9/16-inch standoffs to hold the boards firmly together (forum topic 817).

Standard evaluation systems ship with the Compact Flash build of this board. The Personality Board can also be populated with a 10/100BT Ethernet chip (to the exclusion of the CF socket). Both population options are shown in the mechanicals.

Illustrations are in 2D and 3D formats.

Board rev. A:
Mechanical (PDF 430kB) and Assembly drawings (PDF 290kB)

3D Model: Pro/E (ZIP 7.5 MB), IGES (ZIP 8 MB)

Board rev. 1:
Mechanical (PDF 500kB) and Assembly drawings (PDF 109kB)

ADS Knowledge Base

Edited by akidder 11-Feb-2003: Add thumbnails of boards; add rev A mechanical and assembly drawings.
Edited by akidder 8-Aug-2003: Correct link to rev A assembly drawing.
Edited by akidder 23-Dec-2003: Add Pro/E model.
Edited by akidder 6-Jan-2004: Add IGES model.
Edited by akidder 20-Apr-2005: Add link to March 2003 standoff topic.
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000