| Author |
Topic |
|
|
akidder
1519 Posts |
 Posted - 04 Mar 2003 : 18:48:26
|
Serial Communications Topic Index
ADS products support a wide range of serial communication protocols including RS-232, RS-422, RS-485, J1708, IrDA and TTL/CMOS serial. Here are links to some of the most useful serial topics on the ADS support forums.
For a list of all Topic Indices, see the Forum Topic Index
Edited by akidder 19-Mar-2003: Add link to 485 references and troubleshooting.
Edited by akidder 25-Mar-2003: Add link to serial loopback, 0V output troubleshooting and non-standard baud rates.
Edited by akidder 12-Jun-2003: Add link to serial connectors post
Edited by akidder 6-Oct-2004: Add link to max baud rate topic
Edited by ctacke 11-Jan-2005: Added J1708 info
Edited by akidder 11-July-2007: Add link to IrDA topic
Edited by jjoseph 16-Jan-2007: Add reference to sleep/wake considerations
|
|
|
akidder
1519 Posts |
Posted - 11 Dec 2014 : 15:09:47
|
The following table provides a quick illustration of how the EIA-232, RS-422, RS-485, and J1708 are typically wired.
The two-wire configurations require that transmitters be disabled after sending.
The J1708 standard includes a higher layer that specifies how collisions are detected, and a randomized re-transmission delay based on the priority of the message/transmitter.
Full-duplex RS-485 networks can be configured in many ways, including a single transmitter on one pair and multiple nodes that can respond on the other pair.
Image source: GCX Users Manual, 110116-10012 (adapted) |
 |
|
| |
Topic |
|
|
|
All Forums
Hardware
Serial Communications (topic index)
Forum Locked
Topic Locked
Send Topic to a Friend
Printer Friendly