All Forums
 Microsoft Windows CE
 CE Debug Port (topic index)
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  


1519 Posts

Posted - 03 Feb 2003 :  14:45:09  Show Profile  Email Poster
Windows CE Debug Port

The CE debug port displays information about the progress of the system boot sequence. It can also be useful for capturing error messages that can occur while your application is running.

Most ADS systems use COM3: for the debug port. Settings are 38400 baud, 8 data bits, 1 stop bit, no parity and no handshaking (38400 8N1). Use a null-modem cable to connect PC to your device. Use a terminal application like Hyperterminal to monitor debug output.

Details about use of the debug port are listed in the following documents:
Windows CE Getting Started
Windows CE Developers Guide

The following are topics related to use of the debug port:

Suppressing debug port output (and using port for application, not debug)
Redirecting the debug output
Command prompt on serial port

Determining the build of CE

For related information, please see the Serial Communications topic index.

For a list of all Topic Indices, see the Forum Topic Index

 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000